Stephen Spangler
New Member
I traded for a BandM line lock.Upon looking it over I notice it only has one output port.Have any of you used one of these this style by placing a T to join the front brake lines and run a line into the solenoid?
Hello there guest and Welcome to Fox Body Mustangs forum, This forum is intended to be used by enthusiasts of the Fox body Ford Mustangs (1979-1993)!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
I've never used or installed a line lock, but I figured it would get installed between the master cylinder and the prop valve. That way, you only need the one in/out.
One front brake line goes to the master and one to a proportion valve.Its kinda a dumb design.Im going try to join the two and plug the master port.I will then use the line coming from the valve to feed the lock then feed the T.Thanx for your reply though.