fastronald
New Member
Can some of you measure the width between your Rear Shock towers where they meet the trunk floor............does your car measure out at 38 1/2" distance? this is the angle where tower and trunk floor actually meet.
Hello there guest and Welcome to Fox Body Mustangs forum, This forum is intended to be used by enthusiasts of the Fox body Ford Mustangs (1979-1993)!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
I suggest a "double adjuster" system.I guess if I pursue my idea of building a true "Bolt In" rear shock tower brace.....it would be a case by case basis as the distance requires. Use 3'/4 i.d. pipe and angle stock with 3/8" grade eight bolts.
May I suggest you use "thinwall" chromoly tubing with "weld in" threaded inserts?Thanks.......I may try that..would use a heavy threaded rod and jam nuts to secure it in position..then line it up and drill two mounting holes and a bolt in. If this works out well.....IK would offer you one to test for the price of shipping.