• Hello there guest and Welcome to Fox Body Mustangs forum, This forum is intended to be used by enthusiasts of the Fox body Ford Mustangs (1979-1993)!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

wifes new 89 4 banger coupe

87_notchfox said:
does anyone know how to erase the codes on obd I?
Click to expand...
1. Setup the system to run a KOEO self-test.
2. Turn Ignition On.
3. As soon as the codes start to flash, disconnect the STI jumper wire.
4. Turn Ignition Off, set the system to run a KOEO self-test again, and confirm code 15 is cleared from memory (CM codes).


Sent from my iPhone using Tapatalk
 
Blown347 said:
1. Setup the system to run a KOEO self-test.
2. Turn Ignition On.
3. As soon as the codes start to flash, disconnect the STI jumper wire.
4. Turn Ignition Off, set the system to run a KOEO self-test again, and confirm code 15 is cleared from memory (CM codes).


Sent from my iPhone using Tapatalk
Click to expand...
Sweet thanks. I got to figure out this code situation on the wife's car
 
You must log in or register to reply here.
Back
Top