Mr.Halifax29
New Member
Alright, I got a '83 GT, and whenever I drive it, like get on it, it moves. Then when I shift the car it moves also, it feels like the rear end of the car just jumps out. Ideas?
-
Hello there guest and Welcome to Fox Body Mustangs forum, This forum is intended to be used by enthusiasts of the Fox body Ford Mustangs (1979-1993)!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
1983 Ford Mustang GT
- Thread starter Mr.Halifax29
- Start date
broncojunkie
Well-Known Member
My first thought would be rear control arm bushings (two of which are actually pressed into the rear end housing).
Mr.Halifax29
New Member
I was thinking that or Sway Bar bushings.
broncojunkie
Well-Known Member
I've removed the rear sway bar on these cars before and didn't even notice a change in regular driving around town. So I would lean more towards the control arms. Definitely worth checking both, though.
347HO
Active Member
When I "back halved" my 86, I observed the factory torque box wasn't completely spot welded to the body... The entire passenger side! Everything was there, just there was 1/2” of air gap between the metal parts needing welding together.
This made my upper control arm pretty spongy feeling.
Maybe check yours while you're under the car?
This made my upper control arm pretty spongy feeling.
Maybe check yours while you're under the car?